Reamers:


High Speed Steel Chucking Reamers with Taper Shank

High Speed Steel Chucking Reamers with Taper Shank

Nominal Diameter m  6

Cutting Edge Length Overall Length Mt Shank No.
3.0 15 122  
3.2 16 124  
3.5 18 126 1
4.0 19 125  
4.5 21 130  
5.0 23 133  
5.5 26 138  
6.0 26 138 1
6.5 28 144  
7.0 31 150  
8.0 33 156  
9.0 36 162  
10.0 38 168 1
11.0 41 175  
12.0 44 182  
13.0 44 182 1
14.0 47 189 1
15.0 50 204 2
16.0 52 210 2
17.0 54 214 2
18.0 56 219 2
19.0 58 223  
20.0 60 228  
21.0 62 232 2
22.0 64 237 2
23.0 66 241 3
23.5 66 264 3
24.0 68 268 3
25.0 68 268  
26.0 70 273  
28.0 71 277  
30.0 73 281 3
31.0 75 285  
31.75 77 290  
32.0 77 317  
37.0 78 321  
35.0 78 321 4
36.0 79 325  
38.0 81 329  
40.0 81 329  
42.0 82 333  
44.0 83 336 4
45.0 83 336  
46.0 84 340  
48.0 86 344 4
50.0 86 344  


Dimensions in mm

Specification conform to IS : 5446 - 1978 / ISO 521 - 1975

These reamers have Straight  Flutes for RH Cutting


Nominal Diameter m  6

Cutting Edge Length Overall Length Mt Shank No.
5/32 5/8 4.7/16  
3/16 3/4 4.9/16  
1/4 7/8 4011/16 1
5/16

1

5.1/16  
3/8 1.1/8 5.1/2  
7/16 1.5/16 6.1/16 1
1/2 1.5/16 6.1/16 1
9/16 1.1/2 7.1/14 2
5/8 1.1/2 7.1/4 2
11/16 1.3/4 8 2
3/4 1.3/4 8 2
13/16 1.3/4 8 2
7/8 2 8.7/8 2
15/16 2 9.5/8 3
1 2 9.5/8 3
1.1/16 2.3/8   3
1.1/8 2.3/8 10.5/8 3
1.3/1.6 2.3/8 10.5/8 3
1.1/4 2.3/8 11.5/8 3
1.5/16 2.3/8   4
1.3/8 2.3/4 12.7/8  
1.7/16 2.3/4 12.7/8  
1.1/5 2.3/4 12.7/8 4
1.5/8 2.3/4 12.7/8  
1.3/4 3.1/8 14.1/4  
1.7/8 3.1/8 14.4/4  
2 3.1/8 12.4/4 4


Dimensions in Inches

Specifications conform to BS : 122 / Part 2 -1964

These reamers have Straight Flutes for RH Cutting

 



 
copyright 2006 © Industrial Engineering Stores, All Rights Reserved, Site Developed by : Nissi Infotech