Milling Cutters: Milling cutters Cylindrical Cutters Side And Face Cutters Single Angle Cutters Double Angle Cutters Equal Angle Cutters 50 Degree Shell and Single Angle Cutters Face Cutters Slotting Cutters Key Way Milling Cutters Hollow Mills Convex Milling Cutters Concave Milling Cutters Single Corner Rounding Cutters Double Corner Rounding Cutters Rotary Tooth form Cutters Parallel Shank Slot Milling Cutters Taper Shank Slot Milling Cutters Parallel Shank Slot Drills Taper Shank Slot Drills Parallel Shank End Mills Taper Shank End Mills 'T' Slot Cutters With Parallel Shank Dovetail Milling Cutters 'T' Slot Cutters With Tapers Shank Woodruff Key Slot Cutters Countersinks 90 Parallel & Taper Shank Counter Bores Parallel & Taper Shank Countersinks 90, 80, 60 & 120 Parallel & Taper Shank Tapered Die Sinking Cutters Screwed Shank Slot Drills Screwed Shank End Mills

High Speed Steel Counter Bores With Parallel Shank and Solid Pilot Diameter H11 Pilot Diameter h9 Shank Diameter h9 Overall Length Cutting Edge Length Over Up to and including 2 3.05 To be specified to suit pilot hole diameter when Ordering   45 7 30.15 5   5 56 10 5 8   8 71 14 8 12.5   12.5 80 18 12.5 20     100 22 * Included 2 mm also. Dimensions in mm. Specification conform to IS : 5704 - 1988 These Counterbores have RH Helical Flutes Rh Cutting. With Morse Taper Shank and Detachable Pilot Diameter Z9 Pilot Diameter e9 Pilot Hole Dia H8 Cone Dia. Overall Length Cutting Edge Length Over Up to and including Over Up to and including 12.5 16 5 14 4 M3 132 22 16 20 6.3 18 5 M4 140 25 20 25 8 22.4 6 M5 150 30 25 31.5 10 28 8 M6 180 35 31.5 40 12.5 35.5 10 M8 190 40 40 50 16 45 12 M8 236 50 50 63 20 56 16 M10 250 63 * Diameters 12.5 mm and Pilot Diameter= 5 mm are also Included Dimensions in mm. Specification conform to IS :5703 - 1988 / ISO 4204 - 1977 These Countersinks have Rh Helical Flutes RH Cutting.