Reamers :

High Speed Steel Machine Jig Reamers


High Speed Steel Machine Jig Reamers


Nominal Diameter m  6

Cutting Edge Length Overall Length Mt Shank No.
6.0 26 138  
6.5 28 144  
7.0 31 150 1
8.0 33 156  
9.0 36 162  
10.0 38 168  
11.0 41 175  
12.0 44 182 1
13.0 44 182  
14.0 47 189  
15.0 50 204  
16.0 52 210  
17.0 54 214 2
18.0 56 219  
19.0 58 223  
20.0 60 228 2
21.0 62 232 2
22.0 64 237 2
23.0 66 241 2
23.5 66 264 3
24.0 68 268  
25.0 68 268  
26.0 70 273 3
28.0 71 277  
30.0 73 281  
31.0 75 285 3
31.75 77 290 3
32.0 77 317 4
34.0 78 321 4
35.0 78 321 4
36.0 79 325  
38.0 81 329  
40.0 81 329 4
42.0 82 333  
44.0 83 336  
45.0 83 336  
46.0 84 340  
48.0 86 344 4
50.0 86 344  


Dimensions in mm

Specification conform to IS : 5446 - 1978 / ISO 521 - 1975

These reamers have Straight  Flutes for RH Cutting


Nominal Diameter m  6

Cutting Edge Length Overall Length Mt Shank No.
1/4 7/8 5.5/8  
5/16 1 5.15/16  
3/8 1.1/8 6.1/4 1
7/16 1.5/16 6.11/16  
1/2 1.5/16 6.11/16  
9/16 1.1/2 7.13/16  
5/8 1.1/2 7.13/16  
11/16 1.3/4 8.7/16 2
3/4 1.3/4 8.7/16  
13/16 1.3/4 8.7/16  
7/8 2   2
15/16 2   3
1 2 8.7/8 3
1.1/16 2.3/8   3
1.1/8 2.3/8   3
1.3/16 2.3/8 8.7/8 3
1.1/4 2.3/8 9.15/16 3
1.5/16 2.3/8 9.15/16 4
1.3/8 2.3/4 10.3/4 4
1.7/16 2.3/4 10.3/4 4
1.1/2 2.3/4 13.1/8  
1.5/8 2.3/4 13.1/8  
1.5/4 3.1/8 14.5/16  
1.7/8 3.1/8 14.5/16  
2 3.1/8 14.5/16  


Dimensions in Inches

Specifications conform to BS : 122 / Part 2 -1964

These reamers have LH Helical Flutes for RH Cutting with one oil groove on the guide

 


 


 
copyright 2006 © Industrial Engineering Stores, All Rights Reserved, Site Developed by : Nissi Infotech