Milling Cutters: Milling cutters Cylindrical Cutters Side And Face Cutters Single Angle Cutters Double Angle Cutters Equal Angle Cutters 50 Degree Shell and Single Angle Cutters Face Cutters Slotting Cutters Key Way Milling Cutters Hollow Mills Convex Milling Cutters Concave Milling Cutters Single Corner Rounding Cutters Double Corner Rounding Cutters Rotary Tooth form Cutters Parallel Shank Slot Milling Cutters Taper Shank Slot Milling Cutters Parallel Shank Slot Drills Taper Shank Slot Drills Parallel Shank End Mills Taper Shank End Mills 'T' Slot Cutters With Parallel Shank Dovetail Milling Cutters 'T' Slot Cutters With Tapers Shank Woodruff Key Slot Cutters Countersinks 90 Parallel & Taper Shank Counter Bores Parallel & Taper Shank Countersinks 90, 80, 60 & 120 Parallel & Taper Shank Tapered Die Sinking Cutters Screwed Shank Slot Drills Screwed Shank End Mills

High Speed Steel Screwed Shank End Mills High Speed Steel Screwed Shank End Mills For Auto lock Clarkson chucks   Standard Series Diameter Cutting Edge Length Eff. Length below Chuck Overall Length Shank Diameter 1/8 3/8 5/8 2.1/8   5/32 1/2 3/4 2.1/4   3/16 1/2 3/4 2.1/4 1/4 7/32 5/8 7/8 2.3/8   1/4 5/8 7/8 2.3/8   9/32 5/8 7/8 2.3/8   5/16 3/4 1 2.1/2   11/32 7/8 1.1/8 2.5/8 3/8 3/8 7/8 1.1/8 2.5/8   13/32 7/8 1.1/8 2.5/8   7/16 7/8 1.1/8 2.5/8   15/32 1 1.1/4 2.3/4 1/2 1/2 1 1.1/4 2.3/4   9/16 1.1/8 1.3/8 2.7/8   5/8 1.1/4 1.1/2 3   11/16 1.3/8 1.5/8 3.1/8 5/8 3/4 1.1/2 1.3/4 3.1/4   13/16 1.1/2 1.3/4 3.1/2   7/8 1.5/8 1.7/8 3.5/8 3/4 15/16 1.5/8 1.7/8 3.5/8   1 1.3/4 1.7/8 4   1.1/16 1.3/4 1.7/8 4   1.1/8 1.7/8 2 4.1/8   1.3/16 1.7/8 2 4.1/8   1.1/4 2 2.1/8 4.1/4   1.5/16 2 2.1/8 4.1/4   1.3/8 2.1/8 2.1/4 4.3/8   1.7/16 2.1/8 2.1/4 4.3/8   1.1/2 2.1/4 2.3/8 4.1/2   1.5/8 2.3/8 2.1/2 4.5/8   1.3/4 2.1/8 2.1/2 4.3/4   Long Series Diameter Cutting Edge Length Eff. Length below Chuck Overall Length Shank Diameter 1/8 3/4 1 2.1/2   5/32 1 1.1/4 2.3/4   3/16 1 1.1/4 2.3/4 1/4 7/32 1.1/4 1.1/2 3   1/4 1.1/4 1.1/2 3   9/32 1.3/8 1.5/8 3.1/8   5/16 1.3/8 1.5/8 31/8   11/32 1.1/2 1.3/4 3.1/4 3/8 3/8 1.1/2 1.3/4 3.1/4   13/32 1.1/2 1.3/4 3.1/4   7/16 1.3/4 2 3.1/2   15/32 2 2.1/4 3.3/4   1/2 2 2.1/4 3.3/4 1/2 9/16 2.1/4 2.1/2 4   5/8 2.1/2 2.3/4 4.1/4   11/16 2.3/4 3 4.1/2 5/8 3/4 3 3.1/4 4.3/4   13/16 3.1/4 3.3/8 5.1/4   7/8 3.1/2 3.5/8 5.1/2 3/4 15/16 3.3/4 3.7/8 6   1 4 4.1/8 6.1/4   1.1/16 4 4.1/8 6.1/4   1.1/8 4 4.1/8 6.1/4 1 1.3/16 4 4.1/8 6.1/4   1.1/4 4 4.1/8 6.1/4   1.5/6 4 4.1/8 6.1/4   1.3/8 4 4.1/8 6.1/4   1.7/16 4 4.1/8 6.1/4 1 1.1/2 4 4.1/8 6.1/4   Dimensions in inches. Specification conform to suit 20T.P.I. Whitwirth Threaded Autolock Clarkson chucks. These End Mills have approximately 300 RH helical flutes for RH Cutting.