Screwing Taps:

High Speed Steel Taper Pipe Taps NGT

High Speed Steel
Taper Pipe Taps (NGT)
Interrupted Threads - Ground Threads.


 

ITM range of 3/4 x 14 NGT Taps - Taper 1:16



ITM Drawing No: Nominal Diameter Thread Per Inch Shank Dia. Max .Thread Dia. Thread Length Overall Length
M-22-531 3/4 14 0.750 1.0770 2.1/8 4.1/2
M-22-535 3/4 14 0.750 1.0750 1.3/8 3.1/4
M-22-534 3/4 14 0.906 1.0770 305/6 5.5/16


Dimensions in mm / Inches

Specification conform to ANSI - B 949 - 1071.

These Taps are usually Supplied in a set of three - Taper, Second and Bottoming.

 

 
copyright 2006 © Industrial Engineering Stores, All Rights Reserved, Site Developed by : Nissi Infotech