Twist Drill :

High Speed Steel Taper Shank Twist Drills For Taper Pin Holes with Taper 1:5


High Speed Steel Taper Shank Twist Drills For Taper Pin Holes - with Taper 1:50

Nominal Diameter Small End Diameter Large end Diameter

OAL

Parallel Diameter Length FI MT Shank No.
5 4.98 6.62 164 6 86  
6 5.97 8.25 196 6 117 1
8 7.97 10.69 222 10 143  
112 11.96 15.70 293 15 198  
16 15.95 21.07 362 15 267 2
20 19.95 25.15 393 22 278  
25 24.94 3.88 433 22 313 3
32 31.93 37.99 472 30 327  
40 39.92 46.22 500 40 348 4
50 49.9. 56.42 550 50 368 5
 

Dimension in mm

Specification Conform to ISO 3438 - 1975

FL - Fluted Length,    OAL = Overall Length,    MT = Morse Taper.


 
copyright 2006 © Industrial Engineering Stores, All Rights Reserved, Site Developed by : Nissi Infotech