IT Screwing Tapes High Speed Steel Tool Bits

Range introduction:

Manufactured from best quality High Speed Steel with variable cobalt content, DAGGER Tool Bits ensure maximum red hardness for greater speeds and efficiency. Rigorous and regular metallurgical tests are undertaken to analyse the quality as well as the composition of the raw-materials used. These include determination of carbide size, decarb, segregation, grain size, response to heat treatment etc., thus guaranteeing you smooth, trouble-free performance.

High Speed Steel - 8% and 10% Cobalt (8-x & 10-x)
Ground Tool Bits

Square & Round

Inch Series						Metric Series
Size	Length					Size	Length
3/16	3	4	6	--	--	5	75	100	150	--	--
1/4	3	4	6	8	--	6	75	100	150	200	--
5/16	3	4	6	8	--	8	75	100	150	200	--
3/8	3	4	6	8	--	10	75	100	150	200	--
1/2	3	4	6	8	10	12	75	100	150	200	250
5/8	--	4	6	8	--	16	--	100	150	200	--
3/4	--	4	6	8	--	20	--	100	150	200	--
1	--	--	6	8	--	25	--	--	150	200	--

* Tolerance on Round section h9 and Square Section h 13

Flat / Rectangular

Inch Series			Metric Series
Size	Length		Size	Length
1/8 x 1	4	6	3 x 25	--	150
1/4 x 1/2	4	6	6 x 12	--	--
1/4 X 3/4	4	6	6 X 20	100	150
1/4 X 1	--	6	6 x 25	100	150
3/8 X 12	4	--	10 X 12	--	--
3/8 X 3/4	--	6	10 X 16	--	150
1/2 X 5/8	--	6	12 X16	--	150
1/2 X 3/4	--	6	12X20	--	150
1/2 X 1	--	6	12X25	--	150
5/8 X 3/4	--	6	16 X 20	--	150
3/4 X 1	--	6	20 X 25	--	150

* Tolerance h 13

Inch Series			Metric Series
Width *	Height	Length	Width *	Height	Length
3/32	5/8	5	2.5	16	125
1/8	3/4	6	3	19	150
1/8	7/8	6	3	22	150
3/19	1	6	5	25	150

* Tolerance h 13